Welcome to Würth Cambodia For trade customers only

Transmission performance improver

GEARADD-(TRANSMISS-TRTMNT-MANUAL)-125ML

Art.-no. 5861400125

EAN 4050642914384

Individual price display after login
Transmission performance improver

Art.-no. 5861400125

Individual price display after login
Quantity
PU
x 12 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Permanent protection of all types of manual transmissions

High-performance lubricant


  • Reduces wear using OMC2 technology

  • Stabilises viscosity

  • Delays oil deterioration

  • Protects against corrosion

  • Extends the service life of components

  • Ensures clean, precise shifting

  • Reduces friction-related noise


Active agent concentrate according to international specification


For maximum pressure load

Notice

Not suitable for polyglycol oils

The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Use if transmission produces noise, gear shifting problems are encountered, and as a preventative measure each time the gear oil is changed and each time the transmission is repaired. Suitable for mineral and synthetic gear oils.

Instructions

Screw on the filler hose and add the contents of the can to the gear oil by tilting the valve. The amount of performance improver must not exceed 10% of the total gear oil volume. The contents of one can are sufficient for 2.5 litres of gear oil.

Contents

125 ml

Colour

Red

Smell/fragrance

Characteristic

Chemical basis

Hydrocarbon

Density

0.8 g/cm³

Density conditions

at 20°C

Shelf life from production

12 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 6
With cotton velour finish inside.
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information